| Category: สารดูดซับ PSA Technology > Molecular Sieve 3A 4A 5A 10A 13X > |
3A Molecular Sieve
Description: An alkali metal alumino-silicate, in the potassium form of the Type A crystal structure.Type 3A will adsorb molecules with critical diameters less than 3 Å (angstroms). Applications:Multi-purpose. Used for the dehydration of various hydrocarbon and non-hydrocarbon gas andliquid streams.
• Drying of unsaturated hydrocarbon streams such as cracked gas, propylene, butadiene, and acetylene.
• The 3A pore size of Type 3A excludes most hydrocarbon molecules from adsorbing, while allowing water adsorption.
Regeneration: Type 3A molecular sieve can be regenerated for re-use by purging or evacuating atelevated temperatures. The degree of regeneration (water removal) is dependent on the temperature and humidity of the purge gas. Handling and Storage: Product must be stored in a dry location (relative humidity < 90%) to prevent re-adsorption of water. Opened packages should be resealed to prevent contamination of the product. Whenever possible, rotate stock to use oldest material first.
3A Molecular Sieve
Application: 3A Molecular Sieve is used for commercial dehydration of unsaturated hydrocarbon streams such as cracked gas, acetylene, propylene, and butadiene. It is also used for dehydration ofalcohol and solvents.
|
Measurement |
||||||
|
Properties |
Unit |
Specification |
||||
|
Diameter |
mm |
1.6-2.5 |
3-5 |
5-8 |
1.6 |
3.2 |
|
Static Water Adsorption |
≥ mg/g |
210 |
210 |
210 |
210 |
210 |
|
CO2 Adsorption |
≤ %wt |
2.0 |
2.0 |
2.0 |
1.0 |
1.0 |
|
Bulk Density |
g/ml |
0.70±0.02 |
0.68±0.02 |
0.66±0.02 |
0.68±0.02 |
0.66±0.02 |
|
Crush Strength |
≥ N |
30 |
80 |
110 |
35 |
70 |
|
Wear Rate |
≤% Wt |
0.1 |
0.1 |
0.1 |
0.2 |
0.2 |
|
Package Moisture |
≤% Wt |
1.0 |
1.0 |
1.0 |
1.0 |
1.0 |
3A Molecular Sieve EPG
Application: Type 3A EPG is used for dehydration of acetylene, oil cracked gas.
|
Properties |
Measurement Unit |
Cylindrical |
|
|
Diameter |
mm |
1.6 |
3.2 |
|
Static Water Adsorption |
≥ mg/g |
210 |
210 |
|
CO2 Adsorption |
≤ % |
1.0 |
1.0 |
|
Bulk Density |
g/ml |
0.68±0.02 |
0.66±0.02 |
|
Crush Strength |
≥ N |
42 |
80 |
|
Wear Rate |
≤% Wt |
0.2 |
0.2 |
|
Package Moisture |
≤% Wt |
1.0 |
1.0 |
3A Activated Powder
Application: 3A Activated Powder is used commercially for insulating glass sealant strips and solvents
|
Properties |
Measurement Unit |
Cylindrical |
|
Form ---- |
Powder |
1.6 |
|
Pore |
Diameter A |
3 |
|
Whiteness |
≥ % |
90 |
|
Particle Diameter |
μ m |
2-4 |
|
Static Water Adsorption |
≥mg/g |
230 |
|
PH |
≤ |
11 |
|
Gravity |
≥g/ml |
44 |
|
Package Moisture |
≤% Wt |
2 |
